Windows: Description and Operation

2005 Mitsubishi Lancer Evolution L4-2.0L DOHC TurboSECTION Description and Operation
POWER WINDOWS




GENERAL DESCRIPTION CONCERNING THE POWER WINDOWS
The following ECUs affect the functions and control of the power windows.

POWER WINDOW MAIN SWITCH FUNCTION




RAISES THE DRIVER'S POWER WINDOW
When the front (LH) switch on the power window main switch is pulled up, the system energizes its respective power window regulator motor, and then the driver's window glass rises.




LOWER THE DRIVER'S POWER WINDOW
When the front (LH) switch on the power window main switch is pushed down, the system energizes its respective power window regulator motor, and then the driver's window glass lowers.

LOWERS THE DRIVER'S POWER WINDOW BY ONE-TOUCH FUNCTION
When the front (LH) switch on the power window main switch is pushed down fully, the system energizes its respective power window regulator motor, and then the driver's window glass moves to its lowest position.




RAISES THE PASSENGER'S OR REAR DOOR POWER WINDOW
When the front (RH) or rear (LH or RH) switch on the power window main switch is pulled up, the system energizes its respective power window regulator motor, and then the passenger's or rear door window glass rises.




LOWERS THE PASSENGER'S OR REAR DOOR POWER WINDOW
When the front (RH) or rear (LH or RH) switch on the power window main switch is pushed down, the system energizes its respective power window regulator motor, and then the passenger's or rear door window glass lowers.

POWER WINDOW SUB SWITCH FUNCTION




RAISES THE PASSENGER'S OR REAR DOOR POWER WINDOW
When the power window sub switch (FRONT) or power window sub switch (REAR: LH or RH) is pulled up, the system energizes its respective power window regulator motor, and then the passenger's or rear door window glass rises.




LOWERS THE PASSENGER'S PASSENGER'S OR REAR DOOR POWER WINDOW
When the power window sub switch (front) or power window sub switch (REAR: LH or RH) is pushed down, the system energizes its respective power window regulator motor, and then the passenger's or rear door window glass lowers.




POWER WINDOW TIMER FUNCTION
When the ignition switch is turned to the "ON" position, the power window relay is turned ON. After the ignition switch is turned OFF, the system continues to turn ON the power window relay for about 30 seconds and to enable the opening and closing of the door window by the power window switch. When the driver's or front passenger's door is opened while the timer is in operation, the power window relay will be turned OFF.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.