Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMITSUBISHI2005LANCER EVOLUTION L4-2.0L DOHC TURBOREPAIR AND DIAGNOSISSPECIFICATIONSPRESSURE, VACUUM AND TEMPERATURE SPECIFICATIONSFUEL PRESSURE
2005 Mitsubishi Lancer Evolution L4-2.0L DOHC Turbo
Fuel Pressure
2005 Mitsubishi Lancer Evolution L4-2.0L DOHC TurboSECTION Fuel Pressure
SERVICE SPECIFICATIONS
ITEM STANDARD VALUE
Fuel pressure
Vacuum hose disconnected 289 - 309 kPa (85.3 - 91.2 in.Hg) at curb idle
Vacuum hose connected Approximately 230 kPa (67.9 in.Hg) at curb idle
ITEM STANDARD VALUE
Fuel pressure
Vacuum hose disconnected 289 - 309 kPa (85.3 - 91.2 in.Hg) at curb idle
Vacuum hose connected Approximately 230 kPa (67.9 in.Hg) at curb idle
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.