Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMITSUBISHI2005LANCER EVOLUTION L4-2.0L DOHC TURBOREPAIR AND DIAGNOSISSPECIFICATIONSELECTRICAL SPECIFICATIONSREFRIGERANT TEMPERATURE SENSOR
2005 Mitsubishi Lancer Evolution L4-2.0L DOHC Turbo
Refrigerant Temperature Sensor
2005 Mitsubishi Lancer Evolution L4-2.0L DOHC TurboSECTION Refrigerant Temperature Sensor
SERVICE SPECIFICATIONS
ITEM STANDARD VALUE
Refrigerant temperature switch
Less than 2 ohms Slightly below 150 °C (302 °F)*2
No continuity 150 °C (302 °F) or more
NOTE: *2 When the oil temperature is 150 °C (302 °F) or more and there is no continuity, the resistance will not be 2 & or lower until the oil temperature reduces to 120 °C (248 °F) or less.
ITEM STANDARD VALUE
Refrigerant temperature switch
Less than 2 ohms Slightly below 150 °C (302 °F)*2
No continuity 150 °C (302 °F) or more
NOTE: *2 When the oil temperature is 150 °C (302 °F) or more and there is no continuity, the resistance will not be 2 & or lower until the oil temperature reduces to 120 °C (248 °F) or less.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.