Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMITSUBISHI2005LANCER EVOLUTION L4-2.0L DOHC TURBOREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSINFORMATION BUSSPECIFICATIONS
2005 Mitsubishi Lancer Evolution L4-2.0L DOHC Turbo
Information Bus: Specifications
2005 Mitsubishi Lancer Evolution L4-2.0L DOHC TurboSECTION Specifications
FASTENER TIGHTENING SPECIFICATIONS ITEM SPECIFICATIONS
Door speaker mounting screw 1.5 ± 0.5 N.m (14 ± 4 in-lb)
Engine coolant temperature gauge unit 10.5 ± 0.5 N.m (93 ± 4 in-lb)
Headlight mounting bolt 2.5 ± 0.4 N.m (22 ± 4 in-lb) 4.9 ± 0.9 N.m (43 ± 8 in-lb)
High-mounted stop light mounting bolt 5.4 ± 0.5 N.m (48 ± 4 in-lb)
Radio, tape player, CD player and CD auto changer mounting screw 1.5 ± 0.5 N.m (14 ± 4 in-lb)
Radio bracket mounting bolt 1.5 ± 0.5 N.m (14 ± 4 in-lb)
Rear combination light mounting nut 4.9 ± 0.9 N.m (43 ± 8 in-lb)
Rear speaker mounting screw 1.5 ± 0.5 N.m (14 ± 4 in-lb) 5.0 ± 1.0 N.m (44 ± 9 in-lb)
Tweeter mounting nut 1.5 ± 0.5 N.m (14 ± 4 in-lb)
Amplifier mounting nut 1.5 ± 0.5 N.m (14 ± 4 in-lb) 5.0 ± 1.0 N.m (44 ± 9 in-lb)
Door speaker mounting screw 1.5 ± 0.5 N.m (14 ± 4 in-lb)
Engine coolant temperature gauge unit 10.5 ± 0.5 N.m (93 ± 4 in-lb)
Headlight mounting bolt 2.5 ± 0.4 N.m (22 ± 4 in-lb) 4.9 ± 0.9 N.m (43 ± 8 in-lb)
High-mounted stop light mounting bolt 5.4 ± 0.5 N.m (48 ± 4 in-lb)
Radio, tape player, CD player and CD auto changer mounting screw 1.5 ± 0.5 N.m (14 ± 4 in-lb)
Radio bracket mounting bolt 1.5 ± 0.5 N.m (14 ± 4 in-lb)
Rear combination light mounting nut 4.9 ± 0.9 N.m (43 ± 8 in-lb)
Rear speaker mounting screw 1.5 ± 0.5 N.m (14 ± 4 in-lb) 5.0 ± 1.0 N.m (44 ± 9 in-lb)
Tweeter mounting nut 1.5 ± 0.5 N.m (14 ± 4 in-lb)
Amplifier mounting nut 1.5 ± 0.5 N.m (14 ± 4 in-lb) 5.0 ± 1.0 N.m (44 ± 9 in-lb)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.