Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMITSUBISHI2005LANCER EVOLUTION L4-2.0L DOHC TURBOREPAIR AND DIAGNOSISBRAKES AND TRACTION CONTROLDISC BRAKE SYSTEMBRAKE ROTOR/DISCSPECIFICATIONS
2005 Mitsubishi Lancer Evolution L4-2.0L DOHC Turbo
Brake Rotor/Disc: Specifications
2005 Mitsubishi Lancer Evolution L4-2.0L DOHC TurboSECTION Specifications
Rear disc brake Brake hose connector bolt 15 ± 2 Nm (12 ± 1 ft. lbs.)
Front brakes
Type 4-opposed piston, ventilated disc
Disc effective dia. x thickness mm (in) 263 x 32 (10.4 x 1.3)
Rear brakes
Type 2-opposed piston, ventilated disc
Disc effective dia. x thickness mm (in) 252 x 22 (9.9 x 0.9)
Front brakes
Type 4-opposed piston, ventilated disc
Disc effective dia. x thickness mm (in) 263 x 32 (10.4 x 1.3)
Rear brakes
Type 2-opposed piston, ventilated disc
Disc effective dia. x thickness mm (in) 252 x 22 (9.9 x 0.9)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.