Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMITSUBISHI2004MONTERO SPORT V6-3.5L SOHCREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER HEAD ASSEMBLYVALVE GUIDE
2004 Mitsubishi Montero Sport V6-3.5L SOHC
Valve Guide
2004 Mitsubishi Montero Sport V6-3.5L SOHCSECTION Valve Guide
Valve stem to valve guide clearance
Intake
Standard value 0.02 - 0.05 mm (0.0008 - 0.0019 inch)
Limit 0.10 mm (0.003 inch)
Exhaust
Standard value 0.04 - 0.07 mm (0.0016 - 0.0027 inch)
Limit 0.15 mm (0.005 inch)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.