Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMITSUBISHI2004LANCER L4-2.4L SOHCREPAIR AND DIAGNOSISSTEERING AND SUSPENSIONALIGNMENTSPECIFICATIONSFRONT WHEEL ALIGNMENT
2004 Mitsubishi Lancer L4-2.4L SOHC
Front Wheel Alignment
2004 Mitsubishi Lancer L4-2.4L SOHCSECTION Front Wheel Alignment
Toe-in 1± 2 mm (0.04 ± 0.07 inch)
Steering angle
Inner wheel W/ 14" Wheels 40°40' ± 1°30'
Inner wheel W/ 15" Wheels 39°30' ± 1°30'
Inner wheel W/ 16" Wheels 33°40' ± 1°30'/-2°00'
Outer wheel W/ 14" Wheels(reference) 33°20'
Outer wheel W/ 15" Wheels(reference) 32°30'
Outer wheel W/ 16" Wheels(reference) 28°46'
Camber W/ 14" Wheels 0°00' ± 30' (Left/right deviation within 30')
Camber W/ 15" Wheels 0°05' ± 30' (Left/right deviation within 30')
Camber W/ 16" Wheels -0°05' ± 30' (Left/right deviation within 30')
Caster W/ 14" Wheels 2°55' ± 30' (Left/right deviation within 30')
Caster W/ 15" Wheels 2°45' ± 30' (Left/right deviation within 30')
Caster W/ 16" Wheels 2°55' ± 30' (Left/right deviation within 30')
Kingpin Inclination W/ 14" Wheels 12°40' +/- 1°30'
Kingpin Inclination W/ 15" Wheels 12°30' +/- 1°30'
Kingpin Inclination W/ 16" Wheels 12°40' +/- 1°30'
Steering angle
Inner wheel W/ 14" Wheels 40°40' ± 1°30'
Inner wheel W/ 15" Wheels 39°30' ± 1°30'
Inner wheel W/ 16" Wheels 33°40' ± 1°30'/-2°00'
Outer wheel W/ 14" Wheels(reference) 33°20'
Outer wheel W/ 15" Wheels(reference) 32°30'
Outer wheel W/ 16" Wheels(reference) 28°46'
Camber W/ 14" Wheels 0°00' ± 30' (Left/right deviation within 30')
Camber W/ 15" Wheels 0°05' ± 30' (Left/right deviation within 30')
Camber W/ 16" Wheels -0°05' ± 30' (Left/right deviation within 30')
Caster W/ 14" Wheels 2°55' ± 30' (Left/right deviation within 30')
Caster W/ 15" Wheels 2°45' ± 30' (Left/right deviation within 30')
Caster W/ 16" Wheels 2°55' ± 30' (Left/right deviation within 30')
Kingpin Inclination W/ 14" Wheels 12°40' +/- 1°30'
Kingpin Inclination W/ 15" Wheels 12°30' +/- 1°30'
Kingpin Inclination W/ 16" Wheels 12°40' +/- 1°30'
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.