Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMITSUBISHI2004GALANT V6-3.8L (6G75)REPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSIGNITION SYSTEMSYSTEM SPECIFICATIONS
2004 Mitsubishi Galant V6-3.8L (6G75)
System Specifications
2004 Mitsubishi Galant V6-3.8L (6G75)SECTION System Specifications
FASTENER TIGHTENING SPECIFICATIONS
Ignition system
ITEM SPECIFICATION
Camshaft position sensor bolt 11 ± 1 Nm (98 ± 8 in-lb)
Crankshaft position sensor bolt 9.0 ± 1.0 Nm (80 ± 9 in-lb)
Ignition coil bolt 10 ± 2 Nm (89 ± 17 in-lb)
Knock sensor 23 ± 2 Nm (17 ± 1 ft-lb)
Spark plug 25 ± 4 Nm (18 ± 3 ft-lb)
Ignition system
ITEM SPECIFICATION
Camshaft position sensor bolt 11 ± 1 Nm (98 ± 8 in-lb)
Crankshaft position sensor bolt 9.0 ± 1.0 Nm (80 ± 9 in-lb)
Ignition coil bolt 10 ± 2 Nm (89 ± 17 in-lb)
Knock sensor 23 ± 2 Nm (17 ± 1 ft-lb)
Spark plug 25 ± 4 Nm (18 ± 3 ft-lb)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.