Alignment - Camber Adjustment

2004 Mitsubishi Galant V6-3.8L (6G75)SECTION Alignment - Camber Adjustment
SOURCE: Mitsubishi Tech Talk Article October 2004

TITLE: Front Suspension Camber Adjustment

APPLIES TO: 2004-05 Endeavor & Galant

SERVICE TIP:


CAPS does not list the various bolts available to adjust the camber for these models. The parts, however, are the same as for the previous Galant and current Eclipse models. Use these part numbers:
16 mm - MR333558
14.9 mm - MR333559
14.1 mm - MR333560
13.6 mm- MR333561
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.