Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMITSUBISHI2004FE639 L4-3.9L DSL TURBOREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSTESTING AND INSPECTIONSCAN TOOL TESTING AND PROCEDURES
2004 Mitsubishi FE639 L4-3.9L DSL Turbo
Scan Tool Testing and Procedures
2004 Mitsubishi FE639 L4-3.9L DSL TurboSECTION Scan Tool Testing and Procedures
CONNECTION OF MULTI-USE TESTER II
Special Tools
- Place the starter switch at the LOCK position.
- Connect the connector A to the cigar lighter socket.
- Connect the Multi-Use Tester II connector C (16 pins) to the data link connector B (16 pins).
NOTE: For the operating procedures for the Multi-Use Tester II, refer to the instruction manual for the Multi-Use Tester II.
Special Tools
- Place the starter switch at the LOCK position.
- Connect the connector A to the cigar lighter socket.
- Connect the Multi-Use Tester II connector C (16 pins) to the data link connector B (16 pins).
NOTE: For the operating procedures for the Multi-Use Tester II, refer to the instruction manual for the Multi-Use Tester II.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.