Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMITSUBISHI2004ECLIPSE L4-2.4L SOHCREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSFRONT DOORSYSTEM SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2004 Mitsubishi Eclipse L4-2.4L SOHC
Fastener Tightening Specifications
2004 Mitsubishi Eclipse L4-2.4L SOHCSECTION Fastener Tightening Specifications
Door
ITEM SPECIFICATION
Door check bolt 5.0 ± 1.0 Nm (44 ± 9 in-lb)
Door hinge bolt (door side) 21 ± 4 Nm (16 ± 3 ft-lb)
Door hinge bolt (body side) 26 ± 5 Nm (19 ± 3 ft-lb)
Door latch assembly screw 9.0 ± 2.0 Nm (80 ± 17 in-lb)
Striker screw 20 ±4 Nm (15 ± 2 in-lb)
ITEM SPECIFICATION
Door check bolt 5.0 ± 1.0 Nm (44 ± 9 in-lb)
Door hinge bolt (door side) 21 ± 4 Nm (16 ± 3 ft-lb)
Door hinge bolt (body side) 26 ± 5 Nm (19 ± 3 ft-lb)
Door latch assembly screw 9.0 ± 2.0 Nm (80 ± 17 in-lb)
Striker screw 20 ±4 Nm (15 ± 2 in-lb)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.