Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMITSUBISHI2004ECLIPSE L4-2.4L SOHCREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYCRANKSHAFT, ENGINE
2004 Mitsubishi Eclipse L4-2.4L SOHC
Crankshaft, Engine
2004 Mitsubishi Eclipse L4-2.4L SOHCSECTION Crankshaft, Engine
ENGINE OVERHAUL
Crankshaft bolt 162 ± 5 Nm (119 ± 4 ft. lbs.)
Crankshaft end play
Standard value 0.05 - 0.25 mm (0.002 - 0.009 inch)
Limit 0.40 mm (0.015 inch)
Crankshaft journal outside diameter 57.0 mm (2.24 inch)
Crankshaft pin outside diameter 45.0 mm (1.77 inch)
Crankshaft journal oil clearance
Standard value 0.02 - 0.04 mm (0.0008 - 0.0015 inch)
Limit 0.1 mm (0.003 inch)
Crankshaft bolt 162 ± 5 Nm (119 ± 4 ft. lbs.)
Crankshaft end play
Standard value 0.05 - 0.25 mm (0.002 - 0.009 inch)
Limit 0.40 mm (0.015 inch)
Crankshaft journal outside diameter 57.0 mm (2.24 inch)
Crankshaft pin outside diameter 45.0 mm (1.77 inch)
Crankshaft journal oil clearance
Standard value 0.02 - 0.04 mm (0.0008 - 0.0015 inch)
Limit 0.1 mm (0.003 inch)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.