Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMITSUBISHI2004DIAMANTE V6-3.5L SOHCREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINETIMING COMPONENTSSYSTEM SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2004 Mitsubishi Diamante V6-3.5L SOHC
Fastener Tightening Specifications
2004 Mitsubishi Diamante V6-3.5L SOHCSECTION Fastener Tightening Specifications
| Auto tensioner bolt | 24 Nm | ||
| Tensioner pulley bolt | 49 Nm | ||
| Tensioner arm bolt | 44 Nm | ||
| Tensioner arm | 44 Nm | ||
| Tensioner pulley | 48 Nm | ||
| Timing belt cover | Rear | 13 Nm | |
| Rear center | 12 - 15 Nm | ||
| Timing belt front lower cover | 8 Nm | ||
| Timing belt front upper cover, front | 8 Nm | ||
| Timing belt front upper cover, rear | 8 Nm | ||
| Timing belt | Amount of projection of auto tensioner rod (Distance between the tensioner arm and auto tensioner body) | Standard value | 4.8 - 6.0 mm |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.