Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMITSUBISHI2004DIAMANTE V6-3.5L SOHCREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINEINTAKE MANIFOLDFASTENER TIGHTENING SPECIFICATION
2004 Mitsubishi Diamante V6-3.5L SOHC
Fastener Tightening Specification
2004 Mitsubishi Diamante V6-3.5L SOHCSECTION Fastener Tightening Specification
ITEMS SPECIFICATION
Intake manifold
Fuel high pressure hose connection bolt 5 Nm (4 ft-lb)
Injector and delivery pipe assembly bolt 12 Nm (9 ft-lb)
Intake manifold nut 20-23 Nm (15-17 ft-lb)
Timing belt cover bolt 10-12 Nm (7-9 ft-lb)
Intake manifold
Fuel high pressure hose connection bolt 5 Nm (4 ft-lb)
Injector and delivery pipe assembly bolt 12 Nm (9 ft-lb)
Intake manifold nut 20-23 Nm (15-17 ft-lb)
Timing belt cover
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.