Power Mirror Control Module: Description and Operation

2004 Mitsubishi Diamante V6-3.5L SOHCSECTION Description and Operation
- When the remote-controlled mirror switch is operated while the ignition key is in "ACC" or "ON" position, the front door module (LH) determines operator requirements according to switch output signals.
The front door module (LH) positions the LH door mirror by driving the mirror motors or sends a signal to the assist-ECU via the SWS communication line.
The assist-ECU drives the RH door mirror motors to position the mirror according to the signal received.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.