Mechanical Specifications

2004 Mitsubishi Diamante V6-3.5L SOHCSECTION Mechanical Specifications
Emission control system

ITEMS SPECIFICATION

Catalytic converter bolt 49 Nm (33 ft-lb)
Catalytic converter nut 49 Nm (33 ft-lb)
Center exhaust pipe to tail pipe bolt 13 Nm (10 ft-lb)
Damper bolt 34 Nm (25 ft-lb)
Evaporative emission canister bracket bolt 13 Nm (10 ft-lb)
Front exhaust pipe nut 49 Nm (36 ft-lb)
Hanger bracket bolt 13 Nm (10 ft-lb)
Harness protector blot 7 Nm (5 ft-lb)
Heated oxygen sensor 44 Nm (33 ft-lb)
Heated oxygen sensor 20 Nm (15 ft-lb)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.