Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMITSUBISHI1990ECLIPSE AWD L4-1997CC 2.0L DOHC TURBOREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSTHROTTLE POSITION SENSORSPECIFICATIONS
1990 Mitsubishi Eclipse AWD L4-1997cc 2.0L DOHC Turbo
Throttle Position Sensor: Specifications
1990 Mitsubishi Eclipse AWD L4-1997cc 2.0L DOHC TurboSECTION Specifications
Base Ignition Timing [1] 5° +/- 2° BTDC at idle
Fuel Injector Coil Resistance (NON-TURBO)
At 20°C (68°F) 13 - 16 Ohms
Fuel Injector Coil Resistance (TURBOCHARGED)
At 20°C (68°F) 2 - 3 Ohms
Fuel pressure control valve [1]
At 20°C (68°F) 36- 44 Ohms
Idle Speed Control Servo Resistance
At 20°C (68°F) 28 - 33 Ohms
Throttle Position Sensor Adjustment Voltage
At curb Idle 0.48 - 0.52 Volts
Throttle Position Sensor Resistance 3.5 - 6.5 Kohms
Wastegate solenoid valve [1]
At 20°C (68°F) 36- 44 Ohms
[1] Turbocharged models only.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.