Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMITSUBISHI1990ECLIPSE AWD L4-1997CC 2.0L DOHC TURBOREPAIR AND DIAGNOSISMAINTENANCEALIGNMENTSERVICE AND REPAIRREAR TOE-IN
1990 Mitsubishi Eclipse AWD L4-1997cc 2.0L DOHC Turbo
Rear Toe-In
1990 Mitsubishi Eclipse AWD L4-1997cc 2.0L DOHC TurboSECTION Rear Toe-In
AWD
1. Adjust rear toe-in by moving mounting bolts located on crossmember side of the trailing arm.
2. Make adjustment by moving left and right bolts equally. One graduation changes toe by approximately .08 inch.
FWD
Rear toe-in is preset to specifications and cannot adjusted. If rear toe-in is out of specification, bent or damaged components must be replaced.
1. Adjust rear toe-in by moving mounting bolts located on crossmember side of the trailing arm.
2. Make adjustment by moving left and right bolts equally. One graduation changes toe by approximately .08 inch.
FWD
Rear toe-in is preset to specifications and cannot adjusted. If rear toe-in is out of specification, bent or damaged components must be replaced.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.