Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMINI2013COOPER COUNTRYMAN, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 73 (AIR BAG RESTRAINT SYSTEMS)TORQUE SPECIFICATIONS
2013 Mini Cooper Countryman, Standard Trans
Torque Specifications
2013 Mini Cooper Countryman, Standard TransSECTION Torque Specifications
WARNING: This page is about a different car, the 2002 BMW 745i and 2002 BMW 745Li. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | ||
|---|---|---|---|
| Front seat belt anchor screw | 33 (45) | ||
| Front seat belt buckle pretensioner mounting screw | 23 (31) | ||
| Front seat belt height adjuster screw | 16 (22) | ||
| Front seat mounting nuts | 32 (44) | ||
| INCH Lbs. (N.m) | |||
| A-pillar mounting screw | 16 (1.8) | ||
| A-pillar sensor mounting screw & nuts | 40 (4.5) | ||
| B-pillar sensor mounting screws | 40 (4.5) | ||
| Front door sensor mounting screws | 73 (8.2) | ||
| Gas generator retaining nuts | 71 (8.0) | ||
| Head air bag module rear retaining screw | 97 (11.0) | ||
| Head air bag module retaining screws | 9 (1.0) | ||
| Passenger-side air bag module retaining screws | 89 (10.0) | ||
| Rear roof pillar retaining screw | 16 (1.8) | ||
| Rear seat sensor mounting screws | 71 (8.0) | ||
| Side air bag module mounting nuts(1) | 29 (3.3) | ||
| Vehicle center sensor mounting screws | 49 (5.5) | ||
|
|||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.