Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMINI2013COOPER COUNTRYMAN, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 72 (AIR BAG RESTRAINT SYSTEMS)TORQUE SPECIFICATIONS
2013 Mini Cooper Countryman, Standard Trans
Torque Specifications
2013 Mini Cooper Countryman, Standard TransSECTION Torque Specifications
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 BMW Z3, 2002 BMW M3, 2002 BMW M Roadster, 2002 BMW M Coupe, and 2002 BMW 330xi. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| Seat belt pretensioner mounting bolt | 35 (48) | |
| Steering wheel | ||
| Nut | 59 (80) | |
| Bolt | 46 (63) | |
| Passenger-side air bag retaining bolts or nuts | ||
| 3 Series, M coupe & roadster, M3 | 16 (22) | |
| Z3 | 18 (24) | |
| INCH Lbs. (N.m) | ||
| Driver-side air bag module Torx screw | ||
| Air Bag II | 18 (2.0) | |
| All Others | 70 (8.0) | |
| Head impact air bag | ||
| A-pillar mounting bolt | 97 (11.0) | |
| Rear mounting bolt | 97 (11.0) | |
| Retainer screws | ||
| Except 3 Series coupe | 22 (2.5) | |
| 3 Series coupe | 35 (4.0) | |
| Head impact gas generator mounting nut | 35 (4.0) | |
| Air bag control unit mounting screws | 78 (8.8) | |
| Passenger-side air bag cover retaining strap screws | 80 (9.0) | |
| Side air bag module mounting screws | 75 (8.5) | |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.