Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMINI2013COOPER COUNTRYMAN, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 60 (BRAKES - REPAIR)TESTINGPARKING BRAKE
2013 Mini Cooper Countryman, Standard Trans
Parking Brake
2013 Mini Cooper Countryman, Standard TransSECTION Parking Brake
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2006 BMW X5, 2005 BMW X5, 2004 BMW X5, 2003 BMW X5, and 2002 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
- At the first tooth, no braking effect should be present.
- At the 2nd tooth, braking action can begin and the indicator light may be lit.
- At the 3rd, tooth, braking action must begin and the indicator light must be lit.
- At the 4th tooth, braking action increases.
- At the 5th tooth, wheel circumferential force must be at least 1100 N at one of the two rear wheels, and at least 1000 N at the other wheel. Wheel circumferential force differential (left to right) maximum 30% from highest value (shortly before wheel lockup). A readjustment must be carried out in event of larger deviations of wheel circumferential force. See PARKING BRAKE under ADJUSTMENTS.
- Braking with locked wheels must be possible with the parking brake.
- The ABS/ASC warning lights, if on, will automatically switch off by switching off engine, waiting at least 30 seconds, restart engine and drive away. Warning lights will go out when speed exceeds 8 mph. (Fault codes will be retained in memory.)
- The parking brake must be readjusted whenever the actuation stroke is greater than 10 teeth.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.