32 00 155 Chassis/Wheel Alignment Without Load

2013 Mini Cooper Countryman, Standard TransSECTION 32 00 155 Chassis/Wheel Alignment Without Load
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2008 BMW 760Li, 2007 BMW 760Li, 2006 BMW 760i, 2006 BMW 760Li, and 2005 BMW 760i. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Carry out chassis/wheel alignment check in design position only: 
  • if the technical prerequisites for an alignment check with ride-height input are lacking
  • if, in spite of repairs having been carried out, the car's ride height between the left and right sides is still outside the tolerance
  • if the vehicles in question have been involved in an accident
  • if the models are M models
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.