Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMINI2013COOPER COUNTRYMAN, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 56 (BRAKES - REPAIR)REMOVAL & INSTALLATIONDISC PADS (REAR)NOTES
2013 Mini Cooper Countryman, Standard Trans
Disc Pads (Rear): Notes
2013 Mini Cooper Countryman, Standard TransSECTION Notes
WARNING: This page is about a different car, the 2004 MINI Cooper, 2003 MINI Cooper, and 2002 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
After completing disc pad installation, press brake pedal to the floor several times to ensure the brake pads are firmly pressed against the brake discs. If the brake pads are replaced simultaneously on the front and rear axles, the brake fluid level must be checked and if necessary the brake fluid topped up to the "MAX" marking.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.