Disc Brake Specifications

2013 Mini Cooper Countryman, Standard TransSECTION Disc Brake Specifications
WARNING: This page is about a different car, the 2003 BMW Z8 and 2002 BMW Z8. However, it is still accessible from the selected car via links, so may be relevant.
DISC BRAKE SPECIFICATIONS

Application In. (mm)
Front
Disc Diameter 13.1 (334)
Minimum Thickness 1.2 (30.4)
Parallelism .0004 (.01)
Radial Runout
Disc Installed .008 (.20)
Disc Removed .002 (.04)
Rear
Disc Diameter 12.9 (328)
Parallelism .0004 (.01)
Radial Runout
Disc Installed .008 (.20)
Disc Removed .002 (.04)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.