Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
00 00 ... Checking roadworthiness
Take car for a test drive and check parking brake and brake pedal.
For cars with rear disk brakes, apply parking brake as instructed.
For subsequent procedure, refer to ADJUSTMENTS . .
Check steering for zero play, ease of movement and directional stability.
Check clutch for problem-free disengagement and non-spasmodic driving off at normal operating temperature.
Check function of all drive positions and driving programs in cars with automatic transmissions.
Visually inspect shock absorbers for leaks.
Check function of indicator/warning lamps and Check Control system.
Check relevant documentation for dates of technical inspection and emissions test. Advise customer of inspection dates.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.