Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMINI2013COOPER COUNTRYMAN, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 4476 (FUNCTIONAL DESCRIPTION - F10 - STABILITY CONTROL SYSTEM, TIRE & WHEEL SYSTEM, LUBRICATION SYSTEM)LUBRICATION SYSTEM - FUNCTIONAL DESCRIPTIONOIL LEVEL MEASUREMENT (VER. 1)NOTES
2013 Mini Cooper Countryman, Standard Trans
Oil level measurement (Ver. 1): Notes
2013 Mini Cooper Countryman, Standard TransSECTION Notes
WARNING: This page does not describe the selected car, but rather 45 other vehicles, including the 2016 BMW M5, 2016 BMW 550i xDrive, 2016 BMW 550i, 2016 BMW 535i xDrive, and 2016 BMW 535i. However, it is still accessible from the selected car via links, so may be relevant.
| Result of the measurement | Oil quantity up to MAX |
|---|---|
| Oil level below minimum: Top up with 1 liter of oil. Then repeat the measurement, more oil may possibly need to be added. | more than 1.3 litres |
| Oil level at minimum: Top up with 1 liter of oil. | approx. 1, 2 litres |
| Oil level OK: 1/4 above minimum. Topping up oil not necessary. | approx. 0, 9 litres |
| Oil level OK: 1/2 above minimum. Topping up oil not necessary. | approx. 0, 7 litres |
| Oil level OK: 3/4 above minimum. Topping up oil not necessary. | approx. 0.4 litres |
| Oil level OK: at maximum. Do not top up oil |
Prerequisites for oil level measurement:
- Oil at operating temperature (over 65 °C).
- Engine at idle or driving.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.