Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMINI2013COOPER COUNTRYMAN, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 4476 (FUNCTIONAL DESCRIPTION - F10 - STABILITY CONTROL SYSTEM, TIRE & WHEEL SYSTEM, LUBRICATION SYSTEM)LUBRICATION SYSTEM - FUNCTIONAL DESCRIPTIONOIL CONDITION SENSOR (VER. 2)MEASUREMENT PROCEDURE AND TARGET VALUES
2013 Mini Cooper Countryman, Standard Trans
Measurement procedure and target values
2013 Mini Cooper Countryman, Standard TransSECTION Measurement procedure and target values
WARNING: This page does not describe the selected car, but rather 45 other vehicles, including the 2016 BMW M5, 2016 BMW 550i xDrive, 2016 BMW 550i, 2016 BMW 535i xDrive, and 2016 BMW 535i. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Explanation |
|---|---|
| 1 | Range for measurement of oil level |
| 2 | Range for measurement of permittivity |
| 3 | Inner capacitor |
| 4 | Dielectric (engine oil) |
| 5 | Outer capacitor |
| 6 | Housing |
| 7 | Temperature sensor |
| 8 | Evaluation electronics |
| 9 | Oil sump |
Please note the following specifications for the oil-level sensor:
| Variable | Value |
|---|---|
| Voltage range | 9 to 16 V |
| Oil level measurement range | 0 to 75 mm |
| Permittivity measurement range | 1 to 6 |
| Maximum conductivity in oil | 0.02 mS |
| Temperature range | -40 to 160 deg C |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.