Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Fuel low-pressure sensor: Notes
The fuel low-pressure sensor is screwed into the fuel delivery line between both of the high pressure pumps.
The fuel low-pressure sensor monitors the pressure of the fuel in the supply line. The fuel is delivered by the fuel pump in accordance with requirements.
The fuel low-pressure sensor serves the electric fuel pump control unit (EKPS). The analogue output signal is evaluated by the engine controller.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.