Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
ECO PRO mode
For ECO PRO mode, a driving experience switch is fitted in the vehicle center console operating facility.
F20 shown
| Index | Explanation |
|---|---|
| 1 | Center console operating facility |
| 2 | 10-pin plug connection |
| 3 | Parking Assist button |
| 4 | Button for bumper camera |
| 5 | Driver experience switch with ECO PRO mode |
| 6 | Button DSC OFF |
ECO PRO guides the driver to adopt the best possible driving style for fuel consumption. The driver is also aided in his consumption-optimized driving style by displays (see Owner's Handbook). Intelligent control of energy management and the heating and air conditioning system forms the cornerstone of ECO PRO. A real life reduction in consumption of up to 10 % can be achieved.
ECO PRO comprises 4 subsections:
- Steady driving
Here, a different characteristic curve is selected for the accelerator pedal and different shift points set for the automatic transmission. For manual gearboxes, the shift point indicator is set differently. ECO PRO will also reactivate the automatic engine start-stop function if it is switched off.
- Heating and air conditioning system control
The heating and air conditioning system is tuned for efficiency. The air conditioning has a lower drying and cooling effect on the air. The refrigerant circuit is placed under a lower load. This reduces the amount of mechanical power required. Actions cause the combustion engine to emit higher levels of heat are avoided as far as possible. The positive temperature coefficient auxiliary heating (diesel engine) is operated at a lower heater output. The air conditioning compressor is switched off when the required temperature is reached, even without cooling power. The automatic engine start-stop function availability is increased. This can have acceptable comfort implications. The vehicle memorizes these settings when ECO PRO is next activated
- Reducing electrical consumers
The mirror heating of the exterior mirrors is switched off (saves up to 100 W). The maximum temperature of the seat heating is restricted to approx. 37.5 °C (normally approx. 42 °C). The heating power of the heated rear window is also restricted.
- Displays in the instrument cluster and optionally in the central information display
| Index | Explanation |
|---|---|
| 1 | Increase in range |
| 2 | Recharging the battery |
| 3 | Shift point indicator |
| 4 | ECO PRO mode |
| 5 | ECO PRO tips in central information display |
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.