61 13... Crimping stop parts

Special tools required: 

• 12 1 080
• 12 1 081
• 12 1 083

1. Crimping contact sleeves for 4 mm ²  comb connectors and ignition cable contacts 

   Use special tool kit 12 1 080 to attach ignition cable contacts and crimp 4 mm² contact sleeves for comb connectors.

   • 12 1 081 (hand pliers)
   • 12 1 083 (nest)
   Fig 1: Identifying Hand Pliers And Nest

   Courtesy of BMW OF NORTH AMERICA, INC.

   Release special tool 12 1 081 :

   Squeeze grips (1) lightly and push release lever (2) in direction of arrow.

   Or:

   Compress handles until limit position, hand pliers unlock automatically.

   Fig 2: Identifying Grips And Release Lever

   Courtesy of BMW OF NORTH AMERICA, INC.

   Place 4 mm² contact sleeve in nest with anti-twist safeguard (1) as far as possible.

   Fig 3: Identifying Anti Twist Safeguard

   Courtesy of BMW OF NORTH AMERICA, INC.

   Preload contact by squeezing matrix in crimping tool. Grip contact (1) firmly only, do not crimp.

   Fig 4: Gripping Contact

   Courtesy of BMW OF NORTH AMERICA, INC.