Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMINI2013COOPER COUNTRYMAN, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 41 (ELECTRICAL COMPONENT LOCATOR)CONNECTORS
2013 Mini Cooper Countryman, Standard Trans
Section 41 (Electrical Component Locator): Connectors
2013 Mini Cooper Countryman, Standard TransSECTION Connectors
WARNING: This page is about a different car, the 1997 BMW 318ti. However, it is still accessible from the selected car via links, so may be relevant.
CONNECTORS
| Component | Component Location |
|---|---|
| X13 (Black, 30 Pin) | At left kick panel. |
| X14 (Natural, 30 Pin) | At left kick panel. |
| X32 (Natural, 12 Pin) | Underside of steering column. |
| X33 (Black, 12 Pin) | Underside of steering column. |
| X72 (Natural, 6 Pin) | Underside of steering column. |
| X113 (Gray, 3 Pin) | Right wheelwell. |
| X114 (Gray, 3 Pin) | Left wheelwell. |
| X118 (Black, 2 Pin) | Left wheelwell. |
| X142 (Gray, 3 Pin) | Under rear of vehicle, on differential. |
| X143 (Gray, 3 Pin) | Under rear of vehicle, near differential. |
| X256 (Black, 26 Pin) | Lower right "A" pillar. |
| X257 (Black, 26 Pin) | Lower left "A" pillar. |
| X295 (Black, 8 Pin) | Underside of steering column. |
| X351 (Black, 2 Pin) | Right "B" pillar. |
| X352 (Black, 2 Pin) | Left "B" pillar. |
| X711 (Black, 3 Pin) | Under luggage compartment lid. |
| X713 (Black, 2 Pin) | Under rear of vehicle, on differential. |
| X782 (Orange, 3 Pin) | Left side of glove box. |
| X783 (Orange, 3 Pin) | Underside of steering column. |
| X6203 (Black, 3 Pin) | At front of engine, below intake manifold. |
| X6240 (Black, 4 Pin) | Left side of engine. |
| X18198 (Black, 10 Pin) | Behind right footwell speaker grille. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.