00 00... Information/warning labels

2013 Mini Cooper Countryman, Standard TransSECTION 00 00... Information/warning labels
WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Vehicle Information/Warning Labels
G09913957Courtesy of BMW OF NORTH AMERICA, INC.

Location: Information/warning label: Country: 

Engine compartment (1):
Carrier support, wheel arch front left top, front passenger side Vehicle identification number India only
Connection, top front BMW Individual Only Individual U490, SA940, Z1XX, SABI
Connection, front top left and right Warning label, xenon light Worldwide
Connection, top front Aluminium screws/bolts China, N5X, see TAIS
Cylinder head cover Ignition coil see TAIS
Connection, top front BMW High
Performance Oil
US only
Connection, top left Retaining hook Worldwide
Sealing cap of coolant expansion tank Coolant cap, China China only
Engine compartment lid, inner panel Refrigerant Worldwide
Engine compartment lid, inner panel Production date Australia, Great Britain
Engine compartment lid, inner panel Exhaust gas US only
Dome bulkhead cross-brace, left Brake fluid Canada only
Connection, top front Exterior paint Only US, CDN version, Japan version, Australia version, Gulf version, China version and for all SKDs
Control unit, 12-cylinder engine: 2 devices = 2 labels Type plate for engine control unit China only
Engine compartment lid, inner panel Duplicate type plate independent heating Only optional equipment SA 536 and only gasoline or diesel
Interior (2):
Windscreen CCC China only
Trim, hot-air routing Vehicle identification number US, Canada or SA8SM
Decor strip Front passenger airbag US only
Windscreen, inner, driver's side, top Maximum speed M+S Car rental SA931, Dispatch, BMW World SA9WR
Bottle holder Parking brake emergency release see TAIS
Complete vehicle, bodyshell:
B-pillar, driver's side Manufacturer's certificate US, CDN, Gulf States
B-pillar, driver's side Tire inflation pressure Worldwide
B-pillar, driver's side Tire inflation pressure monitoring system US only
B-pillar, driver's side Run-flat indicator Worldwide (not US, CDN)
B-pillar, driver's side Warning labels, side airbag see TAIS
B-pillar, right Nameplate China only
B-pillar, driver's side EC type plate with model designation, vehicle identification number, color code Worldwide, not US, CDN, China, Japan, Korea, Australia, Gulf States, SA8AC, SKDs
B-pillar, driver's side Towing Four-wheel drive vehicles only
Rear end (3):
Fuel filler cap, inner Independent heating Europe, only SA536
Fuel filler flap, inner Unleaded gasoline ROZ95 N54/N63/N74 only
Fuel filler flap, inner Premium unleaded China, US
Enclosure for Owner's Handbook Efficient Dynamics SA1CD only
Power distribution box, rear Fastening stickers, rear Worldwide
Luggage compartment floor, front Parking brake emergency release Worldwide
Rear lid, outer Barcode US, Great Britain, China
Toolkit cover BMW Group Mobile Service US, LA801
Toolkit Transmission see TAIS
Underfloor (4):
Front axle support under steering gear drive Airbag (basic setting) For all optional equipment/national-market versions
Link and right tension struts Do not lash down see TAIS

Key: 

US = United States

CDN = Canada

CCC = Car Communication Computer

OBD = On-Board Diagnosis

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.