Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
63 11 820 Replacing left cornering light LED module
Necessary preliminary tasks:
Release screws (1).
Tightening torque: see 3AZ in 63 11 INDIVIDUAL HEADLIGHT PARTS LED .
Remove LED module (2).
Release screws (1).
Remove reflector (2) and disconnect plug connection underneath.
Remove LED module (3).
Installation note:
Seal (4) for LED module (3) must not be damaged and must be installed free from grease.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.