13-6050 Adapter

2013 Mini Cooper Countryman, Standard TransSECTION 13-6050 Adapter
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

0491340 136050 Adapter Minimum set: Mechanical tools MW

NOTE: (adapter set for BMW DIS) For measuring oil and fuel pressures [Released]

Storage Location

A3

B3

SI number

01 12 94 (859)

Consisting of:

Fig 1: Identifying Adapter (0491340)
G04739171Courtesy of BMW OF NORTH AMERICA, INC.
  1. 4 = 0495067 T-piece
    NOTE: Liquidation of existing inventory and then available only as a complete tool set 13 6 050 (83 30 0 491 340) - as of 19.01.12 [Not available separately]
  2. 1 = 0491341 Hose
    NOTE: (Connecting hose) For connecting reducers 13 6 052, 13 6 053, 13 6 55 and adapters 11 4 050, 11 4 160, 11 4 170, 13 5 131 to BMW DIS [Released]
  3. 2 = 0491342 Adapter
    NOTE: Liquidation of existing inventory and then available only as a complete tool set 13 6 050 (83 30 0 491 340) - as of 19.01.12 [Not available separately]
  4. 3 = 0491343 Adapter
    NOTE: Liquidation of existing inventory and then available only as a complete tool set 13 6 050 (83 30 0 491 340) - as of 19.01.12 [Not available separately]
  5. 4 = 0491344 Adapter
    NOTE: (Adapter) [Released]
  6. 5 = 0491345 T-piece
    NOTE: Liquidation of existing inventory and then available only as a complete tool set 13 6 050 (83 30 0 491 340) - as of 19.01.12 [Not available separately]
  7. 6 = 0491346 T-piece
    NOTE: Liquidation of existing inventory and then available only as a complete tool set 13 6 050 (83 30 0 491 340) - as of 19.01.12 [Not available separately]
  8. 7 = 0491347 T-piece
    NOTE: Liquidation of existing inventory and then available only as a complete tool set 13 6 050 (83 30 0 491 340) - as of 19.01.12 [Not available separately]
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.