Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMINI2013COOPER COUNTRYMAN, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 3647 (LIGHTS - REPAIR)HEADLIGHTS63 11... INSTALLING HEADLIGHT REPAIR KIT
2013 Mini Cooper Countryman, Standard Trans
63 11... Installing headlight repair kit
2013 Mini Cooper Countryman, Standard TransSECTION 63 11... Installing headlight repair kit
WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove headlight. See LEFT HEADLIGHT (XENON HEADLIGHT) , LEFT HEADLIGHT (ADAPTIVE HEADLIGHT) , RIGHT HEADLIGHT (XENON HEADLIGHT) , or RIGHT HEADLIGHT (ADAPTIVE HEADLIGHT) .
NOTE:
Damaged retaining tabs (1, 2, 3) can be replaced with the repair kit.
Replacement of headlight is not required!
If necessary, use screws from BMW Parts Department 7 225 228 repair kit.
Replacement of headlight is not required!
If necessary, use screws from BMW Parts Department 7 225 228 repair kit.
Remove damaged retaining tab (1) as shown (see arrow in illustration).
Fit holder (5) and secure with screws (4).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.