Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMINI2013COOPER COUNTRYMAN, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 3627 (COOLING SYSTEM - REPAIR)
2013 Mini Cooper Countryman, Standard Trans
Section 3627 (Cooling System - Repair)
2013 Mini Cooper Countryman, Standard TransSECTION Section 3627 (Cooling System - Repair)
WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.
- Coolant, Checking Cooling System
- 00 Safety information for working on vehicles with automatic engine start-stop function (MSA)
- 17 00 039 Bleeding cooling system and checking for watertightness (N63)
- 17..... Bleeding cooling system for charge air cooler (N63)
- 17 00 009 Checking cooling system for watertightness (N54, N63)
- 17 00 005 Draining and adding coolant (N63)
- 17 00... Instructions for repair work on cooling system
- 17 00 039 Venting and filling cooling system with vacuum filling unit
- Engine Radiator With Attachment
- 64 53... Instructions for replacement of air conditioning capacitors and radiator/coolers
- 17 11... Bleed and fill the cooling system for the charge air cooler with the vacuum filling unit
- 17 11... Clean the radiator ribs
- 17 11 000 Removing and installing radiator (N63, N74)
- 17 11 100 Removing and installing/renewing coolant expansion tank (N63)
- 17 11 120 Removing and installing/replacing cooler for charge air cooler (N63, N74)
- 17 11 370 Removing and installing/replacing cooling loop for hydraulic steering (ALPINA B7 N63)
- 17 11 370 Removing and installing/replacing cooling loop for hydraulic steering (N63, N74)
- 17 11 150 Removing and installing/replacing engine oil cooler (N54, N63)
- 17 11 035 Removing and installing/replacing fan cowl with electric fan (N63)
- 17 13 020 Removing and installing/replacing intercooler expansion tank (N63)
- 17 11 046 Removing and installing/replacing module carrier (N63, N74)
- 17 11 040 Removing and installing/replacing thermostat inserts (N63, N74)
- 17..... Replace the mounts for the module carrier on top and bottom (N63, N74)
- Oil Cooler
- 64 53... Instructions for replacement of air conditioning capacitors and radiator/coolers
- 17 21 500 Flushing transmission oil cooler with lines (automatic transmission) (GA6HP19Z, GAHP26Z, GA6HP32Z)
- 17 21 500 Rinsing the transmission oil cooler with lines (automatic transmission) (GA8HP45Z, GA8HP70Z, GA8HP90Z)
- Oil Cooler Lines
- Charge Air Cooler With Mount
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.