66 53 170 Removing and installing/replacing control unit for Top-/Rear-/Side-View Camera

2013 Mini Cooper Countryman, Standard TransSECTION 66 53 170 Removing and installing/replacing control unit for Top-/Rear-/Side-View Camera
WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD PROTECTION) .

Necessary preliminary tasks: 

Unlock plug connections (2) and disconnect.

Unscrew nuts (1).

Remove control unit (3) in direction of arrow.

Fig 1: Removing Control Unit
G06895096Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.