Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSMINI2013COOPER COUNTRYMAN, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 3564 (ENGINE - SPECIAL TOOLS)ENGINE11-6250 MEASURING DEVICE

2013 Mini Cooper Countryman, Standard Trans

11-6250 Measuring device

2013 Mini Cooper Countryman, Standard TransSECTION 11-6250 Measuring device

WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.

0493143 116250 Measuring device MW

NOTE: (Measuring device) Sensing arm measuring device With small tripod for measuring tooth flank and side clearance on counterbalance shafts, camshafts and crankshafts. [Released]

SI number: 01 04 98 (304)

Consisting of:

Fig 1: Identifying Measuring Device (0493143)

Courtesy of BMW OF NORTH AMERICA, INC.

3 = 0493146 Sensor
NOTE: (Sensor) Sensor arm 11.5 mm [Discontinued]
1 = 0493144 Dial gauge
NOTE: (Dial gauge) With 0.8 mm measuring range in each direction [Released]
2 = 0493145 Tripod
NOTE: (Small hydraulic tripod with magnetic base) [Released]
4 = 0495214 Plate
NOTE: (Fixture) Engine: M47T2; M57T2; S85 [Released]
5 = 0495468 Plate
NOTE: (Fixture M7) Engine camshaft: M67TU [Released]
6 = 0495470 Plate
NOTE: (Fixture M8) Engine crankshaft: M67TU [Released]

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.