Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
63 11 731 Replacing left daytime light LED modules
Necessary preliminary work
- Remove LEFT HEADLIGHT .
Release screws (1).
Carefully lift LED module (2) slightly upwards.
Unfasten plug connection (1) and disconnect.
Remove LED module (2).
Installation note:
Always replace LED modules (2) as a pair.
Replace seal for LED module (2).
Make sure LED module (2) is correctly seated.
Note BULB TYPE .
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.