61 31 193 Removing and installing/replacing button unit (menu/voice input)

2013 Mini Cooper Countryman, Standard TransSECTION 61 31 193 Removing and installing/replacing button unit (menu/voice input)
WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks 

Unlock catches (2) and feed button unit (1) in direction of arrow out of controller.

Fig 1: Unlocking Catches And Button Unit Out Of Controller
G08530504Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1) and remove button unit.

Fig 2: Identifying Plug Connection
G08530505Courtesy of BMW OF NORTH AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.