1010 Tool

2013 Mini Cooper Countryman, Standard TransSECTION 1010 Tool
WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.

0491860 311010 Tool MW

NOTE: For removing and installing the silent blocks in the trailing links and wishbones [Discontinued]

Storage Location

Y10

Consisting of:

  1. = 0491861 Holding sleeve
    NOTE: (Pressure sleeve) For pulling out - discontinued, only available as part of complete tool [Not available separately]
  2. = 0491862 Holding sleeve
    NOTE: (Pressure sleeve) For counter-holding Discontinued, only available via complete tool [cannot be ordered separately]
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.