Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSMINI2013COOPER COUNTRYMAN, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 3476 (FUEL SYSTEM - SPECIAL TOOLS)FUEL SYSTEM13-0290 LINE

2013 Mini Cooper Countryman, Standard Trans

13-0290 Line

2013 Mini Cooper Countryman, Standard TransSECTION 13-0290 Line

WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.

0496707 130290 Line Minimum set: Mechanical tools MW

In conjunction with: 13 3 060; 11 4 310

NOTE: Two fuel lines. Auxiliary lines for 13 3 060. For fuel pressure check in all direct injectors in comb. with IMIB and 100 bar sensor. [Released]

Storage Location

A29

B29

A30

Fig 1: Identifying Line (0496707)

Courtesy of BMW OF NORTH AMERICA, INC.

SI number

01 27 09 (598)

Consisting of:

3 = 0496826 Fastener
NOTE: Available as part of complete tool set 13 0 290 (0496707) only. [Not available separately]
2 = 0496825 Line
NOTE: Available as part of complete tool set 13 0 290 (0496707) only. [Not available separately]
1 = 0496824 Line
NOTE: With connection for 13 3 060 or 11 4 310. Available as part of complete tool set 13 0 290 (0496707) only. [Not available separately]

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.