Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
61 13... Socket housings, 5-pin, 8-pin, System MQS/MPQ
Manufactured by AMP: The following contact types without strand sealing can be fitted in the connector housings:
- MQS (Micro Quadlock System)
- MPQ, width 2.8 mm (Micro Power Quadlock)
- MPQ, width 5.2 mm (Micro Power Quadlock)
Socket housing, 5-pin (Hybrid System MQS/MPQ)
Raise fastener (1) over retaining lug (2) and pull off from contact carrier (3).
Socket housing, 8-pin (MQS):
Raise fastener (1) over retaining lug (2) and pull off from contact carrier (3).
Hold down retaining hook (1) of contact and pull cable with contact as far as secondary lock (2).
Hold down retaining hook in secondary lock (1) again and pull cable with contact (2) completely out of contact carrier (3).
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.