SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMINI2013COOPER COUNTRYMAN, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 3384 (ENGINE ELECTRICAL SYSTEM - SPECIAL TOOLS)ENGINE ELECTRICAL SYSTEM12-7200 TOOL
2013 Mini Cooper Countryman, Standard Trans

12-7200 Tool

2013 Mini Cooper Countryman, Standard TransSECTION 12-7200 Tool
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750i, and 2015 BMW 750Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.

0491180 127200 Tool MW

NOTE: (Tool set) For opening and closing the electronics box [discontinued]

Storage Location

J 106

Consisting of:

  1. 1 = 0491181 Pliers
    NOTE: For bending the sheet metal tabs up [discontinued]
  2. 2 = 0491182 Lever
    NOTE: For bending the sheet metal tabs up [discontinued]
  3. 3 = 0491183 Pliers
    NOTE: For closing the sheet metal tabs [discontinued]
  4. 4 = 0491184 Socket wrench insert
    NOTE: (Torx socket wrench insert T20) [discontinued]
  5. 5 = 0493403 Socket wrench insert
    NOTE: (Torx socket wrench insert T10) [discontinued]
  6. 6 = 0493404 Pin
    NOTE: (Fine line pen) Black, waterproof [discontinued]
  7. 8 = 0493405 Screwdriver
    NOTE: (Screwdriver) [Discontinued]
  8. 9 = 0493406 Tool
    NOTE: (Straightening tool) For Eprom connection [discontinued]
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.