Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSMINI2013COOPER COUNTRYMAN, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 3384 (ENGINE ELECTRICAL SYSTEM - SPECIAL TOOLS)ENGINE ELECTRICAL SYSTEM12-1170 TOOL

2013 Mini Cooper Countryman, Standard Trans

12-1170 Tool

2013 Mini Cooper Countryman, Standard TransSECTION 12-1170 Tool

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750i, and 2015 BMW 750Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.

0491128 121170 Tool Minimum set: Mechanical tools MW

NOTE: (Spark plug tool) For releasing spark plugs and for tightening to torque limitation, special tool is being discontinued without replacement! [Discontinued]

Storage Location

Consisting of:

= 0491129 Socket WAF 46
NOTE: (Spark plug wrench) AF 16 mm S50, M40, M42, M43, M44, M50, M52, M60, M62, M70, M73, W10, W11, N40, N42, N43, N73, N73H [released]
= 0491130 Torque limiter
NOTE: (Torque limiter) 23 Nm ±3 Nm, engine: S14, S38, S50 Do not use the special tool any more because the torque will change. [Blocked]

Fig 1: Identifying Tool (0491128)

Courtesy of BMW OF NORTH AMERICA, INC.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.