32 10 005 Adjustment/initial operation for active front steering

2013 Mini Cooper Countryman, Standard TransSECTION 32 10 005 Adjustment/initial operation for active front steering
WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Adjustment/start-up of the active steering must be carried out:
  • Before adjustment work on the front axle/steering
  • After work on the steering column
  • After replacement of following components:
    • Active front steering control unit
    • ICM control unit
    • Steering-column switch cluster (SZL)
    • Steering gear

Connect vehicle to BMW diagnosis system.

Select and carry out initial operation/adjustment for active front steering under Service functions.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.