SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMINI2013COOPER COUNTRYMAN, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 3303 (FRONT AXLE - SPECIAL TOOLS)FRONT AXLE31-3030 TOOL
2013 Mini Cooper Countryman, Standard Trans

31-3030 Tool

2013 Mini Cooper Countryman, Standard TransSECTION 31-3030 Tool
WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.

0494187 313030 Tool Minimum set: Mechanical tools MW

NOTE: (press-in/press-out tool) For rubber mount on trailing arm [released]

Storage Location

B46

SI number

01 14 01 (766)

Fig 1: Identifying Tool (0494187)
G04739419Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

  1. 2 = 0494188 Bell housing
    NOTE: Liquidation of existing inventory and after that available only as a complete tool set 31 3 030 = 83 30 0 494 187 - as of 09.12.2011 [not available separately]
  2. 1 = 0494189 Bush
    NOTE: Liquidation of existing inventory and after that available only as a complete tool set 31 3 030 = 83 30 0 494 187 - as of 09.12.2011 [not available separately]
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.