Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMINI2013COOPER COUNTRYMAN, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 3292 (COOLING SYSTEM - REPAIR (N54))
2013 Mini Cooper Countryman, Standard Trans
Section 3292 (Cooling System - Repair (N54))
2013 Mini Cooper Countryman, Standard TransSECTION Section 3292 (Cooling System - Repair (N54))
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 BMW 335xi, 2010 BMW 335i, 2009 BMW 335xi, 2009 BMW 335i, and 2008 BMW 335xi. However, it is still accessible from the selected car via links, so may be relevant.
- Coolant, Checking Cooling System
- 17 00 009 Checking cooling system for water leaks
- 17 00 515 Checking function of radiator and heating system
- 17 00 008 Draining and adding coolant (N54, N54T)
- 17 00... Instructions for repair work on cooling system
- 17 00... Notes on retrofitting a trailer towing device
- 00 Safety information for working on vehicles with automatic engine start-stop function (MSA)
- 17 00 039 Venting and filling cooling system with vacuum filling unit
- Notes
- Lifetime coolant filling
- Recycling
- Preconditions
- After the cooling system has been filled with the vacuum filling unit, another bleeding procedure must be performed for the following vehicles
- After the cooling system has been filled with the vacuum filling unit, another bleeding procedure must be performed for vehicles with an electric coolant pump
- 17 00 039 Venting cooling system and checking for watertightness (N54)
- Radiator, Expansion Tank, Pipes
- Engine Radiator With Attachment
- 17 11 370 Remove and install or replace the cooling loop for hydraulic steering (N54, N54T, N52, N52K, N51, N53, S65)
- 17 11 035 Remove and install or replace the fan cowl with electric fan(N53, N54, N54T, N55)
- 17 11 046 Removing and installing / replacing module carrier
- 17 11 000 Removing and installing radiator (N53, N54, N54T)
- 17 11 063 Removing and installing/replacing both radiator brackets (N54, N54T, N52, N52K, N51, N53)
- 17 11 100 Removing and installing/replacing coolant expansion tank (N53, N54, N54T)
- 17 11 150 Removing and installing/replacing engine oil cooler (N54, N54T, N55)
- 17 11 190 Removing and installing/replacing engine oil pipe for oil cooler (N54, N54T, N55)
- Oil Cooler
- Charge Air Cooler With Mount
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.