Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
86 10... Disassembly of base plate: Notes
Disassembly of lashing plate. See REPLACING LASHING PLATE AND LASHING EYE
Disassembly of 12 volt socket. See REPLACING 12 VOLT SOCKET
Remove plastic bush/metal bush. See REMOVING PLASTIC BUSH/METAL BUSH
Disassembly of light guard. See REPLACING REAR LIGHT
Disassembly of front apron. See DISASSEMBLY OF FRONT APRON
Disassembly of left and right aprons. See DISASSEMBLY OF LEFT AND RIGHT APRONS
Disassembly of left and right wheel boxes. See DISASSEMBLY OF LEFT AND RIGHT WHEEL BOXES
Disassembly of rear apron. See DISASSEMBLY OF REAR APRON
Disassembly of left and right lamp housings. See DISASSEMBLY OF LEFT AND RIGHT LAMP HOUSINGS
Disassembly of rivet connection, rear support. See DISASSEMBLY PROCEDURE OF RIVET CONNECTION, REAR SUPPORT
Unscrew bolts (1).
Drill out rivet connections (2).
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.