Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMINI2013COOPER COUNTRYMAN, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 305 (STEERING AND WHEEL ALIGNMENT - REPAIR)ELECTRONIC CHASSIS ALIGNMENT32 00... SUSPENSION IDENTIFICATION BY WAY OF LABEL
2013 Mini Cooper Countryman, Standard Trans
32 00... Suspension identification by way of label
2013 Mini Cooper Countryman, Standard TransSECTION 32 00... Suspension identification by way of label
WARNING: This page is about a different car, the 2005 BMW 545i and 2004 BMW 545i. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The type of suspension can be identified from the label on the spring strut/shock absorber.
Label:
- BMW part number.
- Type of suspension:
- BA = Standard suspension (basic).
- SP = Sport suspension or rough road package.
- MSP = M Sport suspension.
In the case of "SP" identification, there is a further distinction between:
- Sport suspension without spacer ring (A).
- Rough road package with spacer ring (A) above the support bearing.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.